Pulsar 1212NT
Standard Features
The Pulsar 1212NT 2,000W Production Laser
System continues to combine the latest developments in machine, CNC and laser resonator
technologies. In contrast to the traditional “jack-of-all-trades” laser-cutting
machine, the Pulsar 1212NT is a specialist in high production of short run sheet metal
parts.
- Synchronized stainless steel rollers and a
high speed capacitive head provide high throughput of scratch-free stainless and aluminum
parts.
- Stealth clamps reduce dead zones and
maximize material utilization.
- Full machine width work chute automatically
unloads large parts and allows flexibility in the location of the lead-in/lead-out points.
The machine configuration allows several parts to be unloaded simultaneously, increasing
throughput.
- Amada’s patented DoubleCutTM stacked
sheet cutting technique provides productivity gains of up to 80% over conventional single
sheet processing.
- The high speed CNC incorporates a cutting
data library and available network interface. The advanced, turbine driven, RF excited,
fast axial flow CO2 laser automatically calibrates itself at power-up, ensuring parameter
repeatability.
- Requires less than half the floor
space of previous generation Production Laser Systems, with the material moving in only
one direction, the laser mounted on the frame and a pendant mount control system
CALL TODAY AND LET US QUOTE YOUR PROJECTS
WE ARE OPEN 24/5 SO OUR LEAD TIMES ARE SHORT
920.648.3402 ext 115
Email - scottw@seljan.com
|
 |
Technical
Specifications
MOTION PACKAGE
| Travel Method |
|
X axis for work
piece movement, Y axis for cutting head movement |
|
|
| Control Method |
X, Y & Z simultaneous 3
axis control and B axis |
|
|
| Drive Motors |
FANUC AC Servo (X, Y, Z, and
B) |
|
|
| Maximum Sheet Size |
50.0" (Y) x 100.0"
(X) with one repositioning cycle |
|
|
| Maximum Axis Travel |
50.0" (Y) x 50.0"
(X) x 11.8" (Z) x 0.78” (B) |
|
|
| Maximum Cutting Speed |
787 IPM |
|
|
| Maximum Table Speed |
3,149 IPM. per axis (4,454
IPM. 45° vector) |
|
|
| Maximum Speed Z-Axis |
787 IPM |
|
|
| Positioning Accuracy |
±0.0004"/20" |
|
|
| Repeatability |
±0.0004" |
|
|
| Maximum Material Weight |
484 lbs. (4’ x 8’
x 3/8” or 4’ x 6’ x 1/2”) |
|
|
| Number of Clamps |
2 standard specification |
|
|
| Work Chute |
66” (Y) x 21” (X) |
|
|
| Assist Gas |
4 ports, part program
selectable |
|
|
| Machine Size |
125.0” x 150.0” x
95.0” |
|
|
| Machine Weight |
12,232 lbs including laser
resonator |
|
|
| Electrical Requirements |
208 VAC, 3 phase, 60 Hz., 10
KVA |
|
|
| CNC CONTROLLER |
|
|
|
| Model |
AMNC-F |
|
|
| Display |
LCD Color Graphics Display |
|
|
| Control Function |
X, Y, Z-Axis Simultaneous
and Focus Lens B-axis, and Laser Power control (CW, Gated Pulse, Pierce Routines etc.). |
|
|
| Data Input Method |
Manual (MDI), Edit, DNC, or
3 ½” PC compatible disk. |
|
|
| Minimum Command Unit |
0.0001” (X, Y, Z) |
|
|
| Minimum Travel Unit |
0.0001” (X, Y, Z) |
|
|
| Standard Memory |
1 mb |
|
|
| Optional Memory |
2 mb |
|
|
| Hard Drive |
10 gb |
|
|
| Operating Modes |
Automatic and Manual |
|
|
| Display Modes |
Program Contents, Position
Information, Program Check, Settings, Parameters, Beam Diameter Compensation, Assist Gas
Status, Self Diagnostics |
|
|
| Interlock Displays |
Cooling Water Status, Gas
Pressure Status, Vacuum Status, Turbo Blower Malfunction, Shutter Status, Beam Power,
Resonator Discharge, Door Open, WACS. |
|
|
| Electrical requirements |
See Motion Package |
|
